OCCUPANT DETECTION SENSOR INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE


  1. INSTALL OCCUPANT DETECTION SENSOR (FRONT SEAT CUSHION PAD WITH COVER)

    Tech Tips

    The occupant detection sensor cannot be removed from the front seat cushion pad with cover as they are a unit.


    1. Temporarily install the occupant detection sensor (front seat cushion pad with cover).

      Note

      Be careful not to damage the front seat cushion pad with cover.

    2. A01FOYQ

      Engage the 9 hooks.

    3. A01FKF4

      Engage the hook.

    4. A01FOS6

      Install the clip.

    5. A01FOHE

      Engage the claw to install the connector.

    6. A01FN9S

      Connect the connector.

    7. w/ Seat Heater System:


      1. A01FNV0

        Connect the 2 connectors.

      2. Engage the 3 clamps.

      3. A01FMHM

        Engage the clamp.

      4. Connect the connector.

    8. A01FKSLC01
      B0065WB Fastener

      Engage the fastener to secure the front seat airbag assembly wire harness.

  2. INSTALL FRONT SEAT INNER CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  3. INSTALL FRONT SEAT CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  4. INSTALL INNER NO. 1 FRONT SEAT CUSHION SHIELD

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here

  5. CONNECT FRONT SEATBACK PAD WITH COVER

    Tech Tips

    Use the same procedure as for the driver seat

    Click here

  6. INSTALL FRONT SEAT ASSEMBLY

    Tech Tips

    Use the same procedure as for the driver seat.

    Click here