Click here

REAR SEAT INNER BELT ASSEMBLY INSPECTION

Click here
Click here

PROCEDURE


  1. Click here

    INSPECT REAR NO. 1 SEAT INNER BELT ASSEMBLY LH (w/ Rear Seat Belt Warning)


    1. A01FMATC01
      *a

      Component without harness connected

      (Rear No. 1 Seat Inner Belt Assembly LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Rear seat belt LH unfastened Below 1 Ω
      1 - 2 Rear seat belt LH fastened 10 kΩ or higher

      If the result is not as specified, replace the rear No. 1 seat inner belt assembly LH.

  2. Click here

    INSPECT REAR SEAT INNER BELT ASSEMBLY (w/ Rear Seat Belt Warning)


    1. A01FMATC01
      *a

      Component without harness connected

      (Rear Seat Inner Belt Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Rear seat belt RH unfastened Below 1 Ω
      1 - 2 Rear seat belt RH fastened 10 kΩ or higher

      If the result is not as specified, replace the rear seat inner belt assembly.