Click here

FRONT SEATBACK HEATER INSTALLATION

Click here
Click here

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tip:

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

Click here

PROCEDURE


  1. Click here

    INSTALL FRONT SEATBACK HEATER (FRONT SEATBACK PAD WITH COVER)

    Tip:

    The front seatback heater cannot be removed from the front seatback pad with cover as they are a unit.


    1. Temporarily install the front seatback heater (front seatback pad with cover).

      Note:

      Be careful not to damage the front seatback pad with cover.

    2. A01FNTKC01
      *a Bracket

      Engage the 2 brackets and install the front seatback heater (front seatback pad with cover) with the 2 nuts.

      5.5 N*m 56 kgf*cm 49 in.*lbf
      Note:

      • For vehicles with a front seat airbag assembly, the front seatback pad with cover must be securely installed. Otherwise, the front seat airbag assembly may not deploy properly.

      • Make sure that the strap is not twisted after installing the nut.

      • Install the brackets securely.

    3. w/ Climate Control Seat System:


      1. A01FL3F

        Engage the 2 claws to install the seatback climate control blower to the front seatback pad with cover.

    4. A01FLPC

      Engage the clamp.

    5. Connect the connector.

    6. A01FLHI

      Close the 2 fasteners.

    7. A01FKKHC01
      B0065WB Tab

      Insert the 2 tabs.

    8. A01FL1G

      Insert the 2 fasteners.

    9. A01FOUV

      Using hog ring pliers, install 3 new hog rings.

      Note:

      • Be careful not to damage the front seatback pad with cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the front seatback pad with cover.

  2. Click here

    INSTALL NO. 3 FRONT SEAT SHOULDER BELT GUIDE

    Click here

  3. Click here

    INSTALL NO. 1 FRONT SEAT SHOULDER BELT GUIDE

    Click here

  4. Click here

    INSTALL NO. 2 FRONT SEAT SHOULDER BELT GUIDE

    Tip:

    Perform the same procedure as for the No. 1 front seat shoulder belt guide.

  5. Click here

    INSTALL RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY

    Click here

  6. Click here

    INSTALL RECLINING REMOTE CONTROL CAP

    Click here

  7. Click here

    INSTALL FRONT SEAT INNER CUSHION SHIELD

    Click here

  8. Click here

    INSTALL FRONT SEAT CUSHION SHIELD

    Click here

  9. Click here

    INSTALL INNER NO. 1 FRONT SEAT CUSHION SHIELD

    Click here

  10. Click here

    CONNECT FRONT SEATBACK PAD WITH COVER

    Click here

  11. Click here

    INSTALL FRONT SEAT ASSEMBLY

    Click here