LUMBAR SUPPORT ADJUSTER ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RHD and LHD vehicles.

  • The following procedure is for the LHD vehicles.

PROCEDURE


  1. INSTALL FRONT SEATBACK HOOK

    Click here

  2. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY


    1. A01FLW7

      Engage the 2 guides.

    2. Engage the 2 claws to install the lumbar support adjuster assembly to the front seatback frame sub-assembly.

    3. A01FMC4

      Engage the clamp.

    4. Connect the connector to the lumbar support adjuster assembly.

    5. A01FOYT

      Install the clamp.

  3. INSTALL FRONT SEATBACK EDGE PROTECTOR

    Click here

  4. INSTALL FRONT SEATBACK PAD WITH COVER


    1. Temporarily install the front seatback pad with cover.

      Note

      Be careful not to damage the front seatback pad with cover.

    2. A01FNTKC01
      *a Bracket

      Engage the 2 brackets and install the front seatback pad with cover with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      Note


      • For vehicles with a front seat airbag assembly, the front seatback pad with cover must be securely installed. Otherwise, the front seat airbag assembly may not deploy properly.

      • Make sure that the strap is not twisted after installing the nut.

      • Install the brackets securely.

    3. w/ Climate Control Seat System:


      1. A01FL3F

        Engage the 2 claws to install the seatback climate control blower to the front seatback pad with cover.

    4. w/ Seat Heater System:


      1. A01FLPC

        Engage the clamp.

      2. Connect the connector.

    5. A01FLHI

      Close the 2 fasteners.

    6. A01FKKHC01
      B0065WB Tab

      Insert the 2 tabs.

    7. A01FL1G

      Insert the 2 fasteners.

    8. A01FOUV

      Using hog ring pliers, install 3 new hog rings.

      Note


      • Be careful not to damage the front seatback pad with cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the front seatback pad with cover.

  5. INSTALL NO. 3 FRONT SEAT SHOULDER BELT GUIDE

    Click here

  6. INSTALL NO. 1 FRONT SEAT SHOULDER BELT GUIDE

    Click here

  7. INSTALL NO. 2 FRONT SEAT SHOULDER BELT GUIDE

    Tech Tips

    Perform the same procedure as for the No. 1 front seat shoulder belt guide.

  8. INSTALL RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY

    Click here

  9. INSTALL RECLINING REMOTE CONTROL CAP

    Click here

  10. INSTALL FRONT SEAT INNER CUSHION SHIELD

    Click here

  11. INSTALL FRONT SEAT CUSHION SHIELD

    Click here

  12. INSTALL INNER NO. 1 FRONT SEAT CUSHION SHIELD

    Click here

  13. CONNECT FRONT SEATBACK PAD WITH COVER

    Click here

  14. INSTALL FRONT SEAT ASSEMBLY

    Click here