| DTC Code | DTC Name |
|---|---|
| B14C0 | Front Right Seat Heat Sensor Circuit |
DESCRIPTION
Output to the front seat cushion heater temperature sensor stops if one of the following occurs: 1) the temperature sensor is open or shorted; or 2) the temperature sensor is damaged and its output value does not change.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B14C0 | Front Right Seat Heat Sensor Circuit | Seat heater temperature sensor malfunction |
|
WIRING DIAGRAM
PROCEDURE
CLEAR DTC
Clear the DTCs.
| Result | ||
|---|---|---|
|
CHECK FOR DTC
Check for DTCs.
| OK |
|---|
| DTC B14C0 is not output. |
| Result | |||
|---|---|---|---|
|
USE SIMULATION METHOD TO CHECKClick here
INSPECT FRONT SEAT CUSHION PAD WITH COVER RH
Remove the front seat cushion pad with cover RH.
Inspect the front seat cushion pad with cover RH.
| Result | |||
|---|---|---|---|
|
REPLACE FRONT SEAT CUSHION PAD WITH COVER RHClick here
CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - FRONT SEAT CUSHION PAD WITH COVER RH)
Disconnect the O10 air conditioning amplifier assembly connector.
Measure the resistance according to the value(s) in the table below.
| Standard Resistance | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Result | |||
|---|---|---|---|
|
REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLYClick here
REPAIR OR REPLACE HARNESS OR CONNECTOR