VANITY LIGHT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE VANITY LIGHT ASSEMBLY


    1. A01FNP7C02
      B00667M Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw.

    2. A01FMBC

      Disengage the 2 claws to remove the vanity light assembly from the bulb holder as shown in the illustration.

  2. REMOVE VANITY LIGHT BULB


    1. Remove the vanity light bulb from the bulb holder.