Click here

LIGHTING SYSTEM DATA LIST / ACTIVE TEST

Click here
Click here
Click here
  1. DATA LIST

    Note:

    In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

    Tip:

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Data List.

    5. Read the Data List according to the display on the GTS.


      1. Body Electrical > Main Body > Data List
        Tester Display Measurement Item Range Normal Condition Diagnostic Note
        ACC SW Engine switch on (ACC) signal ON or OFF

        ON: Engine switch on (ACC)

        OFF: Engine switch off

        -
        IG SW Engine switch on (IG) signal ON or OFF

        ON: Engine switch on (IG)

        OFF: Engine switch off

        -
        FR Door Lock Pos Door RH unlock detection switch signal LOCK or UNLOCK

        LOCK: Door RH locked

        UNLOCK: Door RH unlocked

        -
        FR Door Courtesy SW Front door courtesy light switch assembly RH signal ON or OFF

        ON: Door RH open

        OFF: Door RH closed

        -
        FL Door Lock Pos Door LH unlock detection switch signal LOCK or UNLOCK

        LOCK: Door LH locked

        UNLOCK: Door LH unlocked

        -
        FL Door Courtesy SW Front door courtesy light switch assembly LH signal ON or OFF

        ON: Door LH open

        OFF: Door LH closed

        -
        Dome Light DOOR SW Door switch signal ON or OFF

        ON: Door switch pressed

        OFF: Door switch not pressed

        -
        Dome Light SW Front dome light switch signal ON or OFF

        ON: Front dome light switch ON

        OFF: Front dome light switch OFF

        -
        Luggage Courtesy SW Luggage compartment door courtesy switch signal ON or OFF

        ON: Luggage compartment door open

        OFF: Luggage compartment door closed

        -
        Interior Light Control Operation of the illuminated entry system OFF or ON Customized value is displayed Displayed only when All Data is selected.
        I/L ON W/Door Key Unlock Function that lights up the interior lights when the doors are unlocked OFF or ON Customized value is displayed Displayed only when All Data is selected.
        Lighting Time Lighting time of the delay control function (illuminated entry system) 15s, 7.5s or 30s Customized value is displayed Displayed only when All Data is selected.
        Room Light when Aprchd Function that lights up the interior lights when a key enters any actuation area OFF or ON Customized value is displayed Displayed only when All Data is selected.
        I/L when ACC OFF Function that lights up the interior lights when the engine switch is turned from on (ACC or IG) to off OFF or ON Customized value is displayed Displayed only when All Data is selected.
        Light Control Function that lights up the ambient lights (while driving) OFF or ON Customized value is displayed Displayed only when All Data is selected.
        Interior Illumination Light Function that lights up the ambient lights (always) OFF or ON Customized value is displayed Displayed only when All Data is selected.

















  2. ACTIVE TEST

    Tip:

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / (desired system) / Active Test.

    5. Perform the Active Test according to the display on the GTS.


      1. Body Electrical > Main Body > Active Test
        Tester Display Measurement Item Control Range Diagnostic Note
        Illuminated Entry System Turns on the lights that are controlled by the illuminated entry system* ON or OFF Perform the Active Test with door switch in the map light assembly turned on.
        Relay for Interior Light Auto Cut Function DOME CUT relay ON or OFF
        • ON: DOME CUT relay off (interior lights turn off)

        • OFF: DOME CUT relay on (interior lights turn on)

        Interior Illumination Light1 Ambient illumination lights ON or OFF

        Preconditions for using the Active Test to check dimmer controlled illumination:


        • Engine switch on.

        • Shift lever is in any position other than P.

        Interior Illumination Light2 Remote touchpad illumination light ON or OFF Although the item is displayed on the GTS, it is not applicable to the vehicle.





      *: Refer to Description for the lights that are controlled by the illuminated entry system.

      Click here


      1. Body Electrical > Entry&Start > Active Test
        Tester Display Measurement Item Control Range Diagnostic Note
        Power/Engine SW Light Engine switch illumination OFF or ON

        When performing this Active Test, make sure the following condition is met:

        The engine switch illumination is off (15 seconds or more have elapsed since it turned from on to off) and the engine switch is on (ACC) or on (IG), or the engine is running.