INTEGRATION RELAY REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE NO. 2 RELAY BLOCK COVER


    1. B0065JWN01

      Disengage the claw (A) as shown in the illustration.

    2. Disengage the 2 claws (B) and remove the No. 2 relay block cover.

  4. REMOVE SEMICONDUCTOR POWER INTEGRATION ECU


    1. B0066IN

      Disengage the 2 claws.

    2. Pull up the semiconductor pwr integration ECU as shown in the illustration.

      Note

      When pulling the semiconductor pwr integration ECU, take care not to damage it.

    3. B0067OL

      Disconnect the 5 connectors and remove the semiconductor pwr integration ECU.

      Note

      When pulling the semiconductor pwr integration ECU, take care not to damage it.