INTEGRATION RELAY INSTALLATION

PROCEDURE

1. INSTALL SEMICONDUCTOR POWER INTEGRATION ECU

   
   

   1. Connect the 5 connectors.

   2. 

      Engage the 2 claws to install the semiconductor pwr integration ECU as shown in the illustration.

2. INSTALL NO. 2 RELAY BLOCK COVER

   
   

   1. 

      Engage the 2 claws (B).

   2. Engage the claw (A) to install the No. 2 relay block cover as shown in the illustration.

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here