BLIND SPOT MONITOR SENSOR INSTALLATION

Click here Click here

PROCEDURE

1. Click here

   INSTALL BLIND SPOT MONITOR SENSOR LH

   
   

   1. Connect the connector.

   2. Install the blind spot monitor sensor LH with the 3 nuts.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

      Note:

      Replace the blind spot monitor sensor LH if it has been dropped or subjected to a severe impact.

2. Click here

   INSTALL BLIND SPOT MONITOR SENSOR RH

   
   

   1. Connect the connector.

   2. Install the blind spot monitor sensor RH with the 3 nuts.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

      Note:

      Replace the blind spot monitor sensor RH if it has been dropped or subjected to a severe impact.

3. Click here

   INSTALL REAR BUMPER ASSEMBLY

   Click here

4. Click here

   PERFORM BLIND SPOT MONITOR BEAM AXIS CONFIRMATION

   Click here

   09870-60000	09870-60010
   09870-60040

5. Click here

   PERFORM DIAGNOSTIC SYSTEM CHECK

   Click here