Click here

BLIND SPOT MONITOR SENSOR REMOVAL

Click here
Click here Click here

PROCEDURE


  1. Click here

    REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. Click here

    REMOVE BLIND SPOT MONITOR SENSOR LH


    1. A01FKTN

      Disconnect the connector.

    2. Remove the 3 nuts and blind spot monitor sensor LH.

      Note:

      Replace the blind spot monitor sensor LH if it has been dropped or subjected to a severe impact.

  3. Click here

    REMOVE BLIND SPOT MONITOR SENSOR RH


    1. A01FNPM

      Disconnect the connector.

    2. Remove the 3 nuts and blind spot monitor sensor RH.

      Note:

      Replace the blind spot monitor sensor RH if it has been dropped or subjected to a severe impact.