Click here

ULTRASONIC SENSOR(for Rear Side) REMOVAL

Click here
Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

Click here

PROCEDURE


  1. Click here

    REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. Click here

    REMOVE ULTRASONIC SENSOR WITH CLIP


    1. A01VN9P

      Disengage the 2 claws.

    2. Disconnect the connector.

    3. Disengage the clamp and remove the ultrasonic sensor with clip.

  3. Click here

    REMOVE NO. 1 ULTRASONIC SENSOR RETAINER

    Tip:

    Perform this step only when necessary.


    1. A01VN5A

      Remove the No. 1 ultrasonic sensor retainer.

  4. Click here

    REMOVE ULTRASONIC SENSOR CLIP


    1. A01VO5BC01
      *a Protective tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the ultrasonic sensor clip from the No. 1 ultrasonic sensor.

  5. Click here

    REMOVE NO. 1 ULTRASONIC SENSOR