Click here

BLIND SPOT MONITOR SYSTEM, Diagnostic DTC:C1AB6

Click here
Click here
DTC Code DTC Name
C1AB6 Blind Spot Monitor Master Module
Click here

DESCRIPTION

This DTC is stored when the blind spot monitor sensor LH detects an internal malfunction.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1AB6 Blind Spot Monitor Master Module The blind spot monitor sensor LH (master) detects an internal malfunction Blind spot monitor sensor LH
Click here

CAUTION / NOTICE / HINT

Note:

When checking for DTCs, make sure that the blind spot monitor main switch (warning canceling switch assembly) is on.

Click here

PROCEDURE


  1. Click here

    CHECK DTC


    1. Clear the DTCs.

      Click here


      1. Body Electrical > Blind Spot Monitor Master > Clear DTCs


    2. Recheck for DTCs and check if the same DTC is output again.


      1. Body Electrical > Blind Spot Monitor Master > Trouble Codes


      OK
      No DTCs are output.
      Result
      Proceed to
      OK
      NG