Click here

PARKING ASSIST MONITOR SYSTEM(w/o Parallel Parking Assist Function), Diagnostic DTC:C168D

Click here
Click here
DTC Code DTC Name
C168D Vehicle Information Unmatched
Click here

DESCRIPTION

This DTC is stored if the rear television camera assembly judges as a result of its self check that the vehicle information received from the main body ECU (multiplex network body ECU) via CAN communication and the vehicle information stored in the rear television camera assembly do not match.

DTC No. Detection Item DTC Detection Condition Trouble Area
C168D Vehicle Information Unmatched Vehicle information is unmatched

  • Rear television camera assembly optical axis adjustment (back camera position setting)

  • Steering angle setting

  • Rear television camera assembly
Click here

CAUTION / NOTICE / HINT

Note:

  • Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed.

    Click here

  • When "!" is displayed on the multi-display assembly after the cable is disconnected from the negative (-) battery terminal, correct the steering angle neutral point.

    Click here

Click here

PROCEDURE


  1. Click here

    PERFORM CALIBRATION


    1. Perform the following procedure depending on the memory conditions to register the vehicle information into the rear television camera assembly.


      1. Rear television camera assembly optical axis adjustment (back camera position setting).

        Click here

      2. Steering angle setting.

        Click here

      Result
      Proceed to
      NEXT

  2. Click here

    CHECK DTC OUTPUT


    1. Clear the DTCs.


      1. Chassis > IPA/Parking Assist Monitor > Clear DTCs


    2. Recheck for DTCs and check that no DTCs are output.


      1. Chassis > IPA/Parking Assist Monitor > Trouble Codes


      Tip:

      • If DTC C168D is output, perform the procedure to register the vehicle information into the rear television camera assembly.

      • If DTC C168D is still output after performing the procedure to register the vehicle information into the rear television camera assembly 3 times, replace the rear television camera assembly.

      Result
      Result Proceed to
      DTC C168D is output A
      DTC C168D is not output B

    • A

      REPLACE LUGGAGE ELECTRICAL KEY SWITCH WITH REAR TELEVISION CAMERA ASSEMBLYClick here

    • B

      END