REAR VIEW MONITOR SYSTEM DTC CHECK / CLEAR

CHECK DTC

1. Connect the GTS to the DLC3.

2. Turn the engine switch on (IG).

3. Turn the GTS on.

4. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.

   
   
   1. Body Electrical > Navigation System > Trouble Codes
   2. 
      
   3. 
      

5. Check for DTCs.

   Note:

   The radio receiver assembly outputs DTCs for the following system. When DTCs other than those in Diagnostic Trouble Code Chart for the rear view monitor system are output, refer to Diagnostic Trouble Code Chart for the relevant system.

   System	Proceed to
   Audio and Visual System (w/o Parking Assist Monitor System)	Click here

CLEAR DTC

1. Connect the GTS to the DLC3.

2. Turn the engine switch on (IG).

3. Turn the GTS on.

4. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.

   
   
   1. Body Electrical > Navigation System > Clear DTCs
   2. 
      
   3. 
      

5. Clear the DTCs.