Click here

AIRBAG SYSTEM, Diagnostic DTC:B1610/13

Click here
Click here Click here
DTC Code DTC Name
B1610/13 Front Airbag Sensor RH Malfunction
Click here

DESCRIPTION

The front airbag sensor RH circuit consists of the airbag ECU assembly and front airbag sensor RH.

The front airbag sensor RH detects impacts to the vehicle and sends signals to the airbag ECU assembly to determine if the airbags and pretensioners should be deployed.

DTC B1610/13 is stored when a malfunction is detected in the front airbag sensor RH.

DTC No. Detection Item DTC Detection Condition Trouble Area Test Mode / Check Mode
B1610/13 Front Airbag Sensor RH Malfunction

  • Front airbag sensor RH malfunction

  • Airbag ECU assembly malfunction

  • Front airbag sensor RH

  • Airbag ECU assembly

 Does not apply to test/check mode
Click here

WIRING DIAGRAM

Click here

Click here

CAUTION / NOTICE / HINT

Note:

After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

Click here

Click here

PROCEDURE


  1. Click here

    CHECK FRONT AIRBAG SENSOR RH


    1. B006875C02
      *1 Front Airbag Sensor LH
      *2 Airbag ECU Assembly

      Turn the engine switch off.

    2. Disconnect the cable from the negative (-) battery terminal.

      CAUTION:

      Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    3. Interchange the front airbag sensor RH with LH and connect the connectors.

    4. Connect the cable to the negative (-) battery terminal.

    5. Clear the DTCs stored in memory.

      Click here


      1. Body Electrical > SRS Airbag > Clear DTCs


    6. Turn the engine switch off.

    7. Turn the engine switch on (IG), and wait for at least 60 seconds.

    8. Check for DTCs.

      Click here


      1. Body Electrical > SRS Airbag > Trouble Codes


      Tip:

      Codes other than DTCs B1610/13 and B1615/14 may be output at this time, but they are not related to this check.

      Result
      Result Proceed to
      DTCs B1610/13 and B1615/14 are not output. A
      DTC B1610/13 is output. B
      DTC B1615/14 is output. C

    9. Turn the engine switch off.

    10. Disconnect the cable from the negative (-) battery terminal.

      CAUTION:

      Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    11. Return the front airbag sensor RH and LH to their original positions and connect the connectors.