Click here

INNER REAR VIEW MIRROR INSTALLATION

Click here
Click here

PROCEDURE


  1. Click here

    INSTALL INNER REAR VIEW MIRROR ASSEMBLY


    1. B00683S

      Using a T20 "TORX" socket wrench, install the inner rear view mirror assembly with the screw as shown in the illustration.

      1.75 N*m 18 kgf*cm 15 in.*lbf

    2. Connect the connector.

  2. Click here

    INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Lane Departure Alert System)


    1. Engage the 2 claws.

    2. B00684I

      Slide the inner rear view mirror stay holder cover and engage the 2 guides to install the inner rear view mirror stay holder cover as shown in the illustration.

  3. Click here

    INSTALL NO. 2 LANE RECOGNITION COVER (w/ Lane Departure Alert System)


    1. A01FMG3

      Engage the 2 claws and 2 guides to install the No. 2 lane recognition cover as shown in the illustration.

  4. Click here

    INSTALL NO. 1 LANE RECOGNITION COVER (w/ Lane Departure Alert System)


    1. A01FNPYC01
      *1 No. 1 Lane Recognition Cover
      *2 Roof Headlining Assembly

      Engage the claw and 4 guides to install the No. 1 lane recognition cover as shown in the illustration.

      Tip:

      Slide the No. 1 lane recognition cover until the space between the roof headlining assembly and it is lost.