COMBINATION METER INSTALLATION

PROCEDURE

1. Click here

   INSTALL COMBINATION METER ASSEMBLY

   
   

   1. Connect each connector.

   2. Engage the clamp.

   3. Install the combination meter assembly with the 4 screws.

2. Click here

   INSTALL METER HOOD SUB-ASSEMBLY

   Click here

3. Click here

   INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

   Click here

4. Click here

   CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

   Click here

5. Click here

   INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

6. Click here

   CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

7. Click here

   CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)

   Click here