Click here

FRONT SEAT SIDE AIRBAG ASSEMBLY REMOVAL

Click here
Click here Click here

CAUTION / NOTICE / HINT

CAUTION:

  • Be sure to read Precaution thoroughly before servicing.

    Click here

  • Wear protective gloves. Sharp areas on the parts may injure your hands.

  • If a front seat airbag assembly has been deployed, replace the front seat airbag assembly, front seatback frame sub-assembly and front seatback pad with cover with the necessary parts in accordance with the extent of the collision damage.

    Click here

Tip:

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

Click here

PROCEDURE


  1. Click here

    REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. Click here

    DISCONNECT FRONT SEATBACK PAD WITH COVER

    Click here

  3. Click here

    REMOVE INNER NO. 1 FRONT SEAT CUSHION SHIELD

    Click here

  4. Click here

    REMOVE FRONT SEAT CUSHION SHIELD

    Click here

  5. Click here

    REMOVE FRONT SEAT INNER CUSHION SHIELD

    Click here

  6. Click here

    REMOVE RECLINING REMOTE CONTROL CAP

    Click here

  7. Click here

    REMOVE RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY

    Click here

  8. Click here

    REMOVE NO. 1 FRONT SEAT SHOULDER BELT GUIDE

    Click here

  9. Click here

    REMOVE NO. 2 FRONT SEAT SHOULDER BELT GUIDE

    Click here

  10. Click here

    REMOVE NO. 3 FRONT SEAT SHOULDER BELT GUIDE

    Click here

  11. Click here

    REMOVE FRONT SEATBACK PAD WITH COVER

    Click here

  12. Click here

    REMOVE FRONT SEAT AIRBAG ASSEMBLY

    CAUTION:

    When storing the front seat airbag assembly, keep the airbag deployment side facing upward.


    1. B0067F2

      Disengage the claw and 3 clamps.

      Tip:

      Disengage the 3 clamps first.

    2. B0065V9C01
      B0065WB Fastener

      Disengage the fastener and separate the front seat airbag assembly wire harness.

    3. B00666Z

      Disengage the 2 clamps.

    4. Remove the 2 nuts and front seat airbag assembly.

      CAUTION:

      • Do not reuse the nuts.

      • Make sure that the front seatback frame sub-assembly is not deformed. If it is deformed, replace it with a new one.