STEERING PAD SWITCH(w/ Lane Departure Alert System) INSTALLATION

Click here

PROCEDURE

1. Click here

   INSTALL STEERING PAD SWITCH ASSEMBLY

   
   
   1. 

      Engage the 2 claws and 2 pins to install the steering pad switch assembly to the steering wheel sub-assembly.

   2. Install the 2 screws.

      2.4 N*m

      24 kgf*cm

      21 in.*lbf

   3. 

      Connect the connector to the spiral cable with sensor sub-assembly.

   4. 

      Pass the wire harness over the 2 guides of the steering shake damper.

2. Click here

   INSTALL CRUISE CONTROL MAIN SWITCH

   Click here

3. Click here

   INSTALL HORN BUTTON ASSEMBLY

   Click here