STEERING PAD SWITCH(w/ Lane Departure Alert System) REMOVAL

Click here

PROCEDURE

1. Click here

   REMOVE HORN BUTTON ASSEMBLY

   Click here

2. Click here

   REMOVE CRUISE CONTROL MAIN SWITCH

   Click here

3. Click here

   REMOVE STEERING PAD SWITCH ASSEMBLY

   
   
   1. 

      Separate the wire harness from the 2 guides of the steering shake damper.

   2. 

      Disconnect the connector from the spiral cable with sensor sub-assembly.

   3. 

      Remove the 2 screws.

   4. Disengage the 2 claws and 2 pins to remove the steering pad switch assembly from the steering wheel sub-assembly.