STEERING PAD SWITCH REMOVAL

Click here

PROCEDURE

1. Click here

   REMOVE HORN BUTTON ASSEMBLY

   Click here

2. Click here

   REMOVE STEERING PAD SWITCH ASSEMBLY

   
   
   1. 

      Disconnect the steering pad switch connector from the spiral cable with sensor sub-assembly.

   2. Disengage the steering pad switch connector clamp from the lower steering wheel boss cover.

   3. Disconnect the steering pad switch connector from the No. 1 switch wire.

   4. 

      Remove the 2 screws.

   5. Disengage the 2 claws and 2 pins to remove the steering pad switch assembly from the steering wheel sub-assembly.