STEERING WHEEL(w/o Lane Departure Alert System) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   INSTALL STEERING SHAKE DAMPER

   
   

   1. Install the steering shake damper to the steering wheel sub-assembly with the 2 screws.

      2.4 N*m

      24 kgf*cm

      21 in.*lbf

2. Click here

   INSTALL STEERING WHEEL HEATER CONTROL ASSEMBLY (w/ Steering Heater)

   Click here

3. Click here

   INSTALL NO. 2 SWITCH WIRE

   Click here

4. Click here

   INSTALL NO. 1 SWITCH WIRE

   Click here

5. Click here

   INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)

   Click here

6. Click here

   INSTALL STEERING PAD SWITCH ASSEMBLY

   Click here

7. Click here

   INSTALL CRUISE CONTROL MAIN SWITCH

   Click here

8. Click here

   ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

9. Click here

   INSPECT AND ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

   Click here

10. Click here

    INSTALL STEERING WHEEL ASSEMBLY

    
    
    1. 

       *a

       Matchmark

       Align the matchmarks on the steering wheel assembly and steering main shaft to install the steering wheel assembly.

    2. Install the steering wheel assembly set nut.

       50 N*m

       510 kgf*cm

       443 in.*lbf

    3. w/ Steering Heater:

       
       

       1. Connect the connector to the steering wheel heater control assembly.

    4. 

       Connect the 2 connectors to the spiral cable with sensor sub-assembly.

    5. 

       Pass the wire harness over the 2 guides of the steering shake damper.

11. Click here

    CHECK STEERING WHEEL CENTER POINT

12. Click here

    INSTALL HORN BUTTON ASSEMBLY

    Click here