REAR DISC BRAKE PAD REPLACEMENT

CAUTION / NOTICE / HINT

Note

After replacing the rear disc brake pads, the brake pedal may feel soft due to clearance between the rear disc brake pads and rear disc. Depress the brake pedal several times until the brake pedal feels firm.

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE REAR WHEEL

    Click here

  2. REMOVE REAR DISC BRAKE PAD

    Click here

  3. REMOVE REAR DISC BRAKE ANTI-SQUEAL SHIM KIT

    Click here

  4. INSPECT DISC THICKNESS

    Click here

  5. INSTALL REAR DISC BRAKE ANTI-SQUEAL SHIM KIT

    Click here

  6. INSTALL REAR DISC BRAKE PAD


    1. A01FMKJN01

      Using SST, push in the rear disc brake piston.

      SST
      09719-77020

      Note


      • Make sure the brake fluid does not overflow from the reservoir.

      • Do not forcibly push in the rear disc brake piston.

    2. Install the rear disc brake pad.

      Click here

  7. INSPECT BRAKE FLUID LEVEL IN RESERVOIR

    Click here

  8. INSTALL REAR WHEEL

    Click here