TELEMATICS SYSTEM(w/ Telematics Transceiver for G-BOOK) REGISTRATION

PROCEDURE

1. Click here

   VEHICLE CONTRACT SETTING

   Tip:
   

   • When replacing the radio receiver assembly, it is not necessary to cancel the G-BOOK contract. (If canceled a new G-BOOK contract needs to be created after replacement.)

   • If the radio receiver assembly or telematics transceiver is replaced on vehicles that do not have a contract for the G-BOOK, perform the vehicle contract setting.

   • If the radio receiver assembly or telematics transceiver is replaced on vehicles that have a contract for the G-BOOK, perform the vehicle contract setting and the procedure to resume the G-BOOK and to start the emergency call service.

   
   

   1. Check the ID before replacement (when diagnosis can be activated).

      Tip:
      

      • If the radio receiver assembly is replaced, check the G-BOOK ID.

      • If the telematics transceiver is replaced, check the DCM ID.

      
      

      1. Enter diagnostic mode.

         Click here

      2. 

         Select "Service Information" on the "Service Menu" screen.

      3. 

         Select "G-BOOK Info for Contract" on the "Service Information" screen.

      4. 

         Check the G-BOOK ID or DCM ID.

         Tip:

         The DCM ID is also specified on the telematics transceiver label.

   2. Replace the radio receiver assembly or telematics transceiver.

      
      

      1. Replace the radio receiver assembly or telematics transceiver at a dealership.

   3. Check the ID after replacement.

      Tip:
      

      • If the radio receiver assembly is replaced, check the G-BOOK ID.

      • If the telematics transceiver is replaced, check the DCM ID.

      
      

      1. Enter diagnostic mode.

         Click here

      2. 

         Select "Service Information" on the "Service Menu" screen.

      3. 

         Select "G-BOOK Info for Contract" on the "Service Information" screen.

      4. 

         Check the G-BOOK ID or DCM ID.

         Tip:

         The DCM ID is also specified on the telematics transceiver label.

   4. 

      Fill-in the Vehicle Contract Setting Request Form.

      
      

      1. After filling in the Vehicle Contract Setting Request Form, fax it to the G-BOOK center.

         Item	Information to Enter	Note
         *1	Enter the dealership name.	Applicant information
         *2	Enter the name of the applicant.	Applicant information
         *3	Enter the fax number of the dealership.	Dealership information
         *4	Enter the phone number of the dealership.	Dealership information
         *5	Enter the VIN of the vehicle.	Vehicle information
         *6	Enter the G-BOOK ID of the old unit. Left-align the number. If the radio receiver assembly has not been replaced, it is not necessary to enter this item.	Used as change-request information from the dealership
         *7	Enter the DCM ID of the old unit. Left-align the number. If the telematics transceiver has not been replaced, it is not necessary to enter this item.	Used as change-request information from the dealership
         *8	Enter the G-BOOK ID of the new unit installed to the vehicle. Left-align the number. If the radio receiver assembly has not been replaced, it is not necessary to enter this item.	Used as change-request information from the dealership
         *9	Enter the DCM ID of the new unit installed to the vehicle. Left-align the number. If the telematics transceiver has not been replaced, it is not necessary to enter this item.	Used as change-request information from the dealership
         *10	Enter the date when the telematics transceiver is replaced. If the telematics transceiver has not been replaced, it is not necessary to enter this item.	Used as change-request information from the dealership
         *11	Enter the mileage on the odometer when the radio receiver assembly is replaced.	Used as change-request information from the dealership
         *12	Enter the date that the mileage was recorded.	Used as change-request information from the dealership

   5. Perform the procedure to resume the G-BOOK.

      
      

      1. Select "G-BOOK.com".

      2. After the guidance screen is displayed, perform the procedure to resume the G-BOOK by following the instructions on the screen.

   6. Perform the procedure to start the emergency call service.

      
      

      1. After completing the procedure to resume the G-BOOK, perform the procedure to start the emergency call service by following the instructions on the screen.

         Tip:

         The emergency call service will be available when the procedure is completed successfully.