HARD DISK DRIVE INSTALLATION

PROCEDURE


  1. PRECAUTION

    Note

    When installing the hard disk drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.

  2. INSTALL HARD DISK DRIVE


    1. A01VMON

      Insert the hard disk drive in the direction shown by the arrow in the illustration to install it.

    2. Install the cover with the 3 screws.

  3. INSTALL NO. 1 RADIO BRACKET

    Click here

  4. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET

    Click here

  5. INSTALL CONSOLE PANEL SUB-ASSEMBLY

    Click here

  6. INSTALL FRONT PANEL GARNISH RH

    Click here

  7. INSTALL FRONT PANEL GARNISH LH

    Click here

  8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  12. INSPECT HARD DISK DRIVE

    Click here