NAVIGATION RECEIVER INSTALLATION

PROCEDURE

1. Click here

   PRECAUTION (w/ Telematics Transceiver)

   Note:

   When installing the hard disk drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.

2. Click here

   INSTALL RADIO RECEIVER ASSEMBLY

3. Click here

   INSTALL HARD DISK DRIVE (w/ Telematics Transceiver)

   Click here

4. Click here

   INSTALL NO. 1 RADIO BRACKET

   Click here

5. Click here

   INSTALL NO. 2 RADIO BRACKET

   Click here

6. Click here

   INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET

   Click here

7. Click here

   INSTALL CONSOLE PANEL SUB-ASSEMBLY

   Click here

8. Click here

   INSTALL FRONT PANEL GARNISH RH

   Click here

9. Click here

   INSTALL FRONT PANEL GARNISH LH

   Click here

10. Click here

    INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Click here

11. Click here

    INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here

12. Click here

    INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

13. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here