REAR STABILIZER BAR INSTALLATION

PROCEDURE

INSTALL REAR STABILIZER BUSHING

Install the 2 rear stabilizer bushings to the outside of the stoppers on the rear stabilizer bar.

Note

Be sure to install the rear stabilizer bushings so that each cutout faces the front of the vehicle.

INSTALL REAR NO. 1 STABILIZER BAR BRACKET LH
1. *a Arrow Mark
  
  Front of the Vehicle
  
  Install the rear No. 1 stabilizer bar bracket LH to the rear stabilizer bushing.
  
  Note
  
  Be sure to install the rear No. 1 stabilizer bar bracket LH so that arrow mark face the front of the vehicle.
INSTALL REAR NO. 1 STABILIZER BAR BRACKET RH

Tech Tips

Perform the same procedure as for the LH side.
INSTALL REAR STABILIZER BAR
1. *a Identification Mark
  
  Install the rear stabilizer bar, rear No. 1 stabilizer bar bracket LH, rear No. 1 stabilizer bar bracket RH and 2 rear stabilizer bushings to the rear suspension member sub-assembly with the 4 bolts.
  
  Torque:
  
  51 N*m { 520 kgf*cm, 38 ft.*lbf }
  Note
  - Temporarily tighten the bolt (A), and then fully tighten the 4 bolts in the order of B, C, D, and A.
  - Ensure that the identification mark is on the right side of the vehicle.
INSTALL REAR SUSPENSION MEMBER SUB-ASSEMBLY

Click here
INSTALL REAR STABILIZER LINK ASSEMBLY LH
1. Install the rear stabilizer link assembly LH with the nut (B).
  
  Torque:
  
  89 N*m { 908 kgf*cm, 66 ft.*lbf }
  
  Tech Tips
  
  If the ball joint turns together with the nut, use a 6 mm hexagon socket wrench to hold the stud bolt.
2. Install the rear stabilizer link assembly LH with the nut (A).
  
  Torque:
  
  15 N*m { 153 kgf*cm, 11 ft.*lbf }
INSTALL REAR STABILIZER LINK ASSEMBLY RH

Tech Tips

Perform the same procedure as for the LH side.
INSTALL REAR WHEEL

Click here