REAR LOWER ARM INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   TEMPORARILY INSTALL REAR NO. 2 SUSPENSION ARM ASSEMBLY

   
   

   1. Temporarily install the rear No. 2 suspension arm assembly to the rear suspension member sub-assembly with the bolt and nut.

      Note:

      Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.

      Tip:

      Insert the bolt with the threaded end facing the front of the vehicle.

2. Click here

   INSTALL REAR LOWER COIL SPRING INSULATOR

   Click here

3. Click here

   INSTALL REAR UPPER COIL SPRING INSULATOR

   Click here

4. Click here

   INSTALL REAR COIL SPRING

   Click here

5. Click here

   TEMPORARILY INSTALL REAR SHOCK ABSORBER ASSEMBLY

   Click here

6. Click here

   INSTALL REAR STABILIZER LINK ASSEMBLY

   Click here

7. Click here

   TEMPORARILY INSTALL REAR NO. 1 SUSPENSION ARM ASSEMBLY

   
   

   1. Temporarily install the rear No. 1 suspension arm assembly to the rear suspension member sub-assembly with the bolt and nut.

      Note:

      Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.

      Tip:

      Insert the bolt with the threaded end facing the front of the vehicle.

   2. Temporarily install the rear No. 1 suspension arm assembly to the rear axle assembly with the bolt and nut.

      Note:

      Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.

      Tip:

      Insert the bolt with the threaded end facing the front of the vehicle.

8. Click here

   CONNECT REAR STEERING TIE ROD ASSEMBLY

   Click here

9. Click here

   STABILIZE SUSPENSION

   Click here

10. Click here

    INSTALL REAR NO. 2 SUSPENSION ARM ASSEMBLY

    
    

    1. Install the rear No. 2 suspension arm assembly (rear suspension member sub-assembly side) with the bolt.

       150 N*m

       1530 kgf*cm

       111 ft.*lbf

       Note:

       Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.

    2. Install the rear No. 2 suspension arm assembly (rear axle assembly side) with the bolt.

       145 N*m

       1479 kgf*cm

       107 ft.*lbf

       Note:

       Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.

11. Click here

    INSTALL REAR SHOCK ABSORBER ASSEMBLY

    Click here

12. Click here

    INSTALL REAR NO. 1 SUSPENSION ARM ASSEMBLY

    
    

    1. Install the rear No. 1 suspension arm assembly (rear suspension member sub-assembly side) with the bolt.

       90 N*m

       918 kgf*cm

       66 ft.*lbf

       Note:

       Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.

    2. Install the rear No. 1 suspension arm assembly (rear axle assembly side) with the bolt.

       90 N*m

       918 kgf*cm

       66 ft.*lbf

       Note:

       Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.

13. Click here

    INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

    Click here

14. Click here

    INSTALL REAR SUSPENSION ARM COVER

    
    

    1. Install the rear suspension arm cover to the rear No. 2 suspension arm assembly with the 2 bolts.

       12 N*m

       122 kgf*cm

       9 ft.*lbf

15. Click here

    INSTALL REAR WHEEL

    Click here

16. Click here

    INSPECT AND ADJUST REAR WHEEL ALIGNMENT

    Click here

17. Click here

    INITIALIZE HEIGHT CONTROL SENSOR SIGNAL

    Click here

18. Click here

    ADJUST HEADLIGHT AIMING

    Click here