REAR LOWER ARM REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   REMOVE REAR WHEEL

   Click here

2. Click here

   REMOVE REAR SUSPENSION ARM COVER

   
   
   1. 

      Remove the 2 bolts and rear suspension arm cover from the rear No. 2 suspension arm assembly.

3. Click here

   SEPARATE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

   Click here

4. Click here

   SEPARATE REAR STEERING TIE ROD ASSEMBLY

   Click here

5. Click here

   REMOVE REAR NO. 1 SUSPENSION ARM ASSEMBLY

   
   
   1. 

      Remove the bolt and nut, and separate the rear No. 1 suspension arm assembly from the rear axle assembly.

      Note:

      Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.

   2. 

      Remove the bolt and nut, and remove the rear No. 1 suspension arm assembly from the rear suspension member sub-assembly.

      Note:

      Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.

6. Click here

   REMOVE REAR STABILIZER LINK ASSEMBLY

   Click here

7. Click here

   SEPARATE REAR SHOCK ABSORBER ASSEMBLY

   Click here

8. Click here

   REMOVE REAR COIL SPRING

   Click here

9. Click here

   REMOVE REAR UPPER COIL SPRING INSULATOR

   Click here

10. Click here

    REMOVE REAR LOWER COIL SPRING INSULATOR

    Click here

11. Click here

    REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY

    
    
    1. 

       Remove the bolt, nut and rear No. 2 suspension arm assembly from the rear suspension member sub-assembly.

       Note:

       Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.