Click here

REAR UPPER ARM REMOVAL

Click here
Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

Click here

PROCEDURE


  1. Click here

    REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY

    Click here

  2. Click here

    REMOVE REAR NO. 1 UPPER CONTROL ARM ASSEMBLY


    1. B0065U3

      Remove the bolt, nut, washer and rear No. 1 upper control arm assembly from the rear suspension member sub-assembly.

      Note:

      • Because the bolt has its own stopper, do not turn the bolt. Loosen the nut with the bolt secured.

      • When replacing either the left or right rear No. 1 upper control arm assembly, the left and right rear No. 1 upper control arm assemblies must be replaced with new ones as a set.

  3. Click here

    REMOVE REAR NO. 2 UPPER CONTROL ARM ASSEMBLY


    1. B0067QP

      Remove the bolt, nut, washer and rear No. 2 upper control arm assembly from the rear suspension member sub-assembly.

      Note:

      Because the bolt has its own stopper, do not turn the bolt. Loosen the nut with the bolt secured.