REAR UPPER ARM REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY

    Click here

  2. REMOVE REAR NO. 1 UPPER CONTROL ARM ASSEMBLY


    1. A01OG0L

      Remove the bolt, nut, washer and rear No. 1 upper control arm assembly from the rear suspension member sub-assembly.

      Note


      • Because the bolt has its own stopper, do not turn the bolt. Loosen the nut with the bolt secured.

      • When replacing either the left or right rear No. 1 upper control arm assembly, the left and right rear No. 1 upper control arm assemblies must be replaced with new ones as a set.

  3. REMOVE REAR NO. 2 UPPER CONTROL ARM ASSEMBLY


    1. B0067QP

      Remove the bolt, nut, washer and rear No. 2 upper control arm assembly from the rear suspension member sub-assembly.

      Note

      Because the bolt has its own stopper, do not turn the bolt. Loosen the nut with the bolt secured.