FRONT SUSPENSION MEMBER REMOVAL

PROCEDURE

1. Click here

   REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

   Click here

2. Click here

   REMOVE FRONT ENGINE MOUNTING INSULATOR

   Click here

3. Click here

   REMOVE ENGINE UNDER COVER SUB-ASSEMBLY LH

   
   

   1. Remove the engine under cover sub-assembly LH.

4. Click here

   REMOVE ENGINE UNDER COVER SUB-ASSEMBLY RH

   Tip:

   Perform the same procedure as for the LH side.

5. Click here

   REMOVE FRONT STABILIZER BAR

   
   
   1. 

      Remove the 2 nuts and front stabilizer bar.

      Tip:

      If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud bolt.

6. Click here

   SEPARATE FRONT LOWER SUSPENSION ARM ASSEMBLY LH

   
   
   1. 

      Remove the 2 bolts, 2 nuts, washer and front suspension member mount bracket sub-assembly, and separate the front lower suspension arm assembly LH.

7. Click here

   SEPARATE FRONT LOWER SUSPENSION ARM ASSEMBLY RH

   Tip:

   Perform the same procedure as for the LH side.

8. Click here

   REMOVE POWER STEERING LINK ASSEMBLY

   
   
   1. 

      Remove the 2 bolts, 2 nuts, 2 washers, 2 front suspension member brace plates and power steering link assembly from the front suspension crossmember sub-assembly.

      Tip:

      Remove the power steering link assembly together with the front lower suspension arm assembly LH and front lower suspension arm assembly RH.