REAR ACCELERATION SENSOR INSTALLATION

PROCEDURE

1. INSTALL ACCELERATION SENSOR ASSEMBLY

   
   

   1. Install the acceleration sensor assembly with the bolt.

      Torque:

      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

      Note

      
      

      • Avoid any impact to the acceleration sensor assembly.

      • Do not drop the acceleration sensor assembly. If it is dropped, replace it with a new one.

   2. Connect the connector.

   3. for LSD:

      
      

      1. Return the luggage compartment trim cover RH to its original position.

2. INSTALL TORQUE VECTORING DIFFERENTIAL ECU ASSEMBLY (for Torque Vectoring Differential)

   Click here

3. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH

   Click here

4. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER

   Click here

5. INSTALL FRONT UPPER LUGGAGE COMPARTMENT TRIM COVER

   Click here

6. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

   Click here

7. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

   Click here

8. INSTALL SPARE WHEEL COVER TRAY (w/o Spare Tire)

   Click here

9. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM COVER

   Click here

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here