TORQUE TRANSFER MODULE FLUID TEMPERATURE SENSOR(for Torque Vectoring Differential) INSTALLATION

Click here

PROCEDURE

1. Click here

   INSTALL TEMPERATURE SENSOR

   
   
   1. 

      Using a 22 mm deep socket wrench, install a new gasket and temperature sensor.

      39.2 N*m

      400 kgf*cm

      29 ft.*lbf

   2. 

      Connect the connector.

2. Click here

   ADD TORQUE TRANSFER MODULE FLUID

   Click here

3. Click here

   INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY

   Click here

4. Click here

   INSTALL REAR SUSPENSION MEMBER BRACE

   Click here