TORQUE TRANSFER MODULE FLUID TEMPERATURE SENSOR(for Torque Vectoring Differential) INSPECTION

PROCEDURE


  1. INSPECT TEMPERATURE SENSOR (for RH Side)


    1. A01FLUYC03
      *1 Temperature Sensor (for RH Side)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      A-1 (TMPR) - Body ground Always 10 kΩ or higher
      A-1 (TMPR) - A-2 (TMGR) 0 °C (32 °F) to 155 °C (311 °F) 0.2 to 30.8 kΩ

  2. INSPECT TEMPERATURE SENSOR (for LH Side)


    1. A01FLUYC04
      *1 Temperature Sensor (for LH Side)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      B-1 (TMPL) - Body ground Always 10 kΩ or higher
      B-1 (TMPL) - B-2 (TMGL) 0 °C (32 °F) to 155 °C (311 °F) 0.2 to 30.8 kΩ