REAR DIFFERENTIAL CARRIER ASSEMBLY(for LSD) REMOVAL

PROCEDURE


  1. DRAIN DIFFERENTIAL OIL

    Click here

  2. REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY

    Click here

  3. REMOVE REAR SUSPENSION ARM BRACKET ASSEMBLY

    Click here

  4. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

    Note


    • Do not damage the installation surface when removing the rear differential carrier assembly.

    • The remaining oil may leak out when removing the rear differential carrier assembly.

    • Securely support the rear differential carrier assembly while performing this step to avoid excessively tilting or dropping the rear differential carrier assembly.

    • Remove the bolts with the rear differential carrier assembly secured.


    1. B00670GC01
      *a Attachment

      Support the rear differential carrier assembly with 2 attachments or equivalent tools as shown in the illustration.

      CAUTION:

      The rear differential carrier assembly is a heavy component. Make sure that it is supported securely.

      Note

      Use attachments or equivalent tools to keep the rear differential carrier assembly level.

    2. Using a 12 mm hexagon socket wrench, remove the 3 bolts (B).

      B0065DWN03
    3. Remove the 2 bolts (A) and 2 rear lower differential mount stoppers.

    4. Remove the rear suspension member sub-assembly and 2 rear upper differential mount stoppers from rear differential carrier assembly.