Click here

TORQUE VECTORING DIFFERENTIAL SYSTEM, Diagnostic DTC:C2A0C

Click here
Click here
DTC Code DTC Name
C2A0C Motor Power Voltage Circuit
Click here

DESCRIPTION

This DTC is stored when an abnormal drive power supply voltage is detected for a certain period of time.

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate
C2A0C Motor Power Voltage Circuit

Diagnosis Condition:


  • Engine switch on (IG)

Abnormal condition:


  • IG power source voltage is below 16 V and PIG power source voltage is 18.5 V or more.

Malfunction Time:


  • 2 seconds or more

Trip logic:


  • 1 trip detection logic

 Torque vectoring differential ECU assembly

  • Master Warning Light: Comes on

  • Multi-information Display Error Message: Comes on
Click here

CAUTION / NOTICE / HINT

Tip:

If the torque vectoring differential ECU assembly has been replaced, perform "All Learning".

Click here

Click here

PROCEDURE


  1. Click here

    CHECK DTC OUTPUT (TVD)


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Enter the following menus: Chassis / TVD / Trouble Codes.

    4. Check for DTCs.


      1. Chassis > TVD > Trouble Codes


      Result
      Result Proceed to
      DTC C2A0C only is output. A
      DTCs other than DTC C2A0C are output. B
      DTCs are not output. C

      1. Turn the engine switch off.