REAR DRIVE SHAFT ASSEMBLY REMOVAL

PROCEDURE

1. Click here

   REMOVE REAR SUSPENSION MEMBER BRACE LH

   
   
   1. 

      *A	for LSD
      *B	for Torque Vectoring Differential

      Remove the 2 bolts and rear suspension member brace LH.

2. Click here

   REMOVE REAR SUSPENSION MEMBER BRACE RH

   Tip:

   Use the same procedure as for the LH side.

3. Click here

   REMOVE REAR AXLE ASSEMBLY LH

   Click here

4. Click here

   REMOVE REAR AXLE ASSEMBLY RH

   Tip:

   Use the same procedure as for the LH side.

5. Click here

   SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY (for Torque Vectoring Differential)

   for LH Side:

   Click here

6. Click here

   DRAIN TORQUE TRANSFER MODULE FLUID (for Torque Vectoring Differential)

   Click here

7. Click here

   REMOVE REAR DRIVE SHAFT ASSEMBLY LH

   
   
   1. 

      *A	for LSD
      *B	for Torque Vectoring Differential

      Using SST, remove the rear drive shaft assembly LH.

      09520-01010
      09520-24010	09520-32040

      Note:
      

      • Be careful not to damage the rear drive shaft oil seal, inboard joint boot and drive shaft dust cover.

      • Be careful not to drop the drive shaft assembly.

   2. 

      Using a screwdriver, remove the shaft snap ring.

8. Click here

   REMOVE REAR DRIVE SHAFT ASSEMBLY RH

   Tip:

   Use the same procedure as for the LH side.