Click here

SHIFT PADDLE SWITCH INSTALLATION

Click here
Click here

CAUTION / NOTICE / HINT

Note:

Do not rotate the spiral cable without the steering wheel assembly with the battery connected and the engine switch on (IG).

Click here

PROCEDURE


  1. Click here

    INSTALL NO. 1 SWITCH WIRE (w/ Lane Departure Alert System)

    Tip:

    Perform this procedure only when replacement of the No. 1 switch wire is necessary.


    1. Engage the 4 guides to install the No. 1 switch wire to the lower steering wheel boss cover.

      Note:

      If the heater thermistor comes off the lower steering wheel cover, replace the steering wheel assembly.

    2. Install steering vibration and heater ECU.

      Click here

    3. Install steering pad switch assembly.

      Click here

    4. Install cruise control main switch.

      Click here

  2. Click here

    INSTALL NO. 2 SWITCH WIRE (w/o Lane Departure Alert System)

    Tip:

    Perform this procedure only when replacement of the No. 2 switch wire is necessary.


    1. Engage the 2 guides to install the No. 2 switch wire to the steering wheel assembly.

  3. Click here

    INSTALL NO. 1 SWITCH WIRE (w/o Lane Departure Alert System)

    Tip:

    Perform this procedure only when replacement of the No. 1 switch wire is necessary.


    1. Engage the 5 guides to install the No. 1 switch wire to the steering wheel assembly.

    2. Connect the No. 1 switch wire connector.

    3. Engage the No. 2 switch wire connector clamp to the steering wheel assembly.

  4. Click here

    INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)


    1. Connect the 2 shift paddle switch (transmission shift switch assembly) connectors to install the 2 shift paddle switches (transmission shift switch assemblies) to the No. 1 switch wire.

    2. Engage the 4 claws and 2 guides to connect the 2 shift paddle switches (transmission shift switch assemblies) to the steering wheel assembly.

    3. Install 4 new screws.

      1.7 N*m 17 kgf*cm 15 in.*lbf
  5. Click here

    INSTALL STEERING WHEEL ASSEMBLY (w/ Lane Departure Alert System)

    Click here

  6. Click here

    INSTALL STEERING WHEEL ASSEMBLY (w/o Lane Departure Alert System)

    Click here