TRANSMISSION WIRE INSTALLATION

PROCEDURE


  1. INSTALL TRANSMISSION WIRE


    1. Coat the O-ring with ATF.

    2. Install the transmission wire to the automatic transmission case sub-assembly with the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }
    3. A01FKZ6

      Connect the transmission wire connector and raise the lever to engage the claw.

      Tech Tips

      Push up the lever until the claw of the transmission wire connector makes a connection sound.

    4. Connect the transmission revolution sensor (SP2) connector.

    5. Connect the transmission revolution sensor (NT) connector.

    6. Connect the transmission revolution sensor (NC3) connector.

  2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

    Click here