Click here

CAMERA HEATER INSTALLATION

Click here
Click here

PROCEDURE


  1. Click here

    INSTALL FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY

    Note:

    • Do not apply force to the heater area as the heater may become damaged.

    • Do not forcibly pull the wire harness as it may become damaged.


    1. B0065SLC01
      B0066ET Install in this Direction (1)
      B0066SK Install in this Direction (2)
      B00667M Heater Area

      Engage the 2 guides and 2 claws as indicated by the arrows, in the order shown in the illustration to install the No. 2 forward recognition cover.

      Note:

      Make sure that the 2 claws are engaged as shown in the illustration. Failure to do so may result in the malfunction of systems that use the forward recognition camera.

    2. B0065PDC02
      *a Clamp
      *b Rib

      Engage the clamp and 5 ribs to install the forward recognition with heater hood sub-assembly.

      Note:

      As the No. 1 forward recognition cover cannot be installed correctly if the clamp and ribs are not engaged securely, make sure to engage each clamp and rib securely.

      Tip:

      Engage the clamp and ribs in the order shown in the illustration.

    3. Connect the connector.

  2. Click here

    INSTALL FORWARD RECOGNITION CAMERA

    Click here