Click here

FORWARD RECOGNITION CAMERA SYSTEM, Diagnostic DTC:C1AA9

Click here
Click here
DTC Code DTC Name
C1AA9 Front Camera Module Beam Axis Not Adjusted
Click here

DESCRIPTION

If forward recognition camera adjustment is not performed after installing the forward recognition camera, DTC C1AA9 is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1AA9 Front Camera Module Beam Axis Not Adjusted 2 seconds after the engine switch is turned on (IG), the forward recognition camera detects that forward recognition camera adjustment has not been completed. Forward recognition camera
Click here

CAUTION / NOTICE / HINT

Note:

  • When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle. As a result, a DTC may be stored.

  • If the forward recognition camera has been replaced with a new one, be sure to perform forward recognition camera adjustment.

    Click here

Click here

PROCEDURE


  1. Click here

    CHECK FOR DTCs (FORWARD RECOGNITION CAMERA SYSTEM)


    1. Clear the DTCs.

      Click here


      1. Chassis > Front Recognition Camera > Clear DTCs


    2. Perform the following procedure.

      Tip:

      If the following procedure is not performed, the previously output DTC cannot be detected.


      1. Turn the engine switch on (IG) and wait 2 seconds or more.

    3. Check for DTCs.

      Click here


      1. Chassis > Front Recognition Camera > Trouble Codes


      Result
      Result Proceed to
      DTC C1AA9 is not output A
      DTC C1AA9 is output B

  2. Click here

    PERFORM FORWARD RECOGNITION CAMERA ADJUSTMENT


    1. Perform forward recognition camera adjustment.

      Click here

      Result
      Proceed to
      NEXT

  3. Click here

    CHECK FOR DTCs (FORWARD RECOGNITION CAMERA SYSTEM)


    1. Clear the DTCs.

      Click here


      1. Chassis > Front Recognition Camera > Clear DTCs


    2. Perform the following procedure.

      Tip:

      If the following procedure is not performed, the previously output DTC cannot be detected.


      1. Turn the engine switch on (IG) and wait 2 seconds or more.

    3. Check for DTCs.

      Click here


      1. Chassis > Front Recognition Camera > Trouble Codes


      Result
      Result Proceed to
      DTC C1AA9 is not output A
      DTC C1AA9 is output B

    • A

      END

    • B

      REPLACE FORWARD RECOGNITION CAMERAClick here