STARTER INSTALLATION

PROCEDURE

1. Click here

   INSTALL FLYWHEEL HOUSING SIDE COVER

   
   

   1. Install the flywheel housing side cover.

2. Click here

   INSTALL STARTER ASSEMBLY

   
   

   1. Install the starter assembly with the 2 bolts.

      37 N*m

      377 kgf*cm

      27 ft.*lbf

   2. Install the terminal cover with the nut.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

   3. Connect terminal 30 with the nut.

      9.8 N*m

      100 kgf*cm

      87 in.*lbf

   4. Close the terminal cover.

   5. Connect the starter assembly connector.

3. Click here

   INSTALL NO. 3 EXHAUST MANIFOLD HEAT INSULATOR

   
   

   1. Install the No. 3 exhaust manifold heat insulator with the 3 bolts.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

4. Click here

   INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY RH

   Click here

5. Click here

   CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here