STARTER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH

    Click here

  4. REMOVE NO. 3 EXHAUST MANIFOLD HEAT INSULATOR


    1. B0065L6

      Remove the 3 bolts and No. 3 exhaust manifold heat insulator.

  5. REMOVE STARTER ASSEMBLY


    1. B0067J9C01
      *1 Terminal Cover

      Disconnect the starter assembly connector.

    2. Open the terminal cover.

    3. Remove the nut and disconnect terminal 30.

    4. Remove the nut and terminal cover.

    5. B00652N

      Remove the 2 bolts and starter assembly.

  6. REMOVE FLYWHEEL HOUSING SIDE COVER


    1. B0065PS

      Remove the flywheel housing side cover.