Click here

THERMOSTAT REMOVAL

Click here
Click here

CAUTION / NOTICE / HINT

B0066AWC06
*1 thermostat (thermostat housing assembly) *2 oil cooler hose sub-assembly
*3 oil cooler assembly (for air cooled type) - -
Note:

When the oil cooler assembly (for air cooled type) has been removed/installed or the oil cooler hose sub-assembly has been disconnected/reconnected, check the engine oil level after warming up the engine oil to between 100°C and 120°C to open the thermostat between the engine and oil cooler assembly (for air cooled type).

Tip:

Enter the following menus: Powertrain / Engine / Data List / Engine Oil Temperature.


  1. Powertrain > Engine > Data List
    Tester Display
    Engine Oil Temperature




Click here

PROCEDURE


  1. Click here

    REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

  2. Click here

    DRAIN ENGINE OIL

    Click here

  3. Click here

    REMOVE OIL THERMOSTAT HOUSING ASSEMBLY


    1. B00689J

      Remove the 2 bolts and disconnect the oil cooler hose sub-assembly.

    2. B0067JZ

      Remove the 2 O-rings from the oil cooler hose sub-assembly.

    3. B0065S3C02
      *1 Oil Thermostat Housing Assembly
      *2 Oil Cooler Assembly
      B0067U9 Oil Cooler Union Bolt
      B00679M Bolt

      Remove the oil cooler union bolt and gasket.

    4. Remove the bolt, separate the oil cooler assembly and then remove the oil thermostat housing assembly.

    5. B0067J6

      Remove the O-ring from the oil thermostat housing assembly.

    6. B0067DP

      Remove the O-ring from the oil cooler assembly.