SCAVENGING PUMP INSTALLATION

PROCEDURE

1. Click here

   INSTALL SCAVENGING PUMP ASSEMBLY

   
   

   1. Temporarily install the scavenging pump assembly and a new gasket with the 6 bolts.

   2. 

      Using several steps, uniformly install and tighten the 6 bolts in the order shown in the illustration.

      23 N*m

      235 kgf*cm

      17 ft.*lbf

2. Click here

   INSTALL NO. 3 OIL PIPE

   
   

   1. Install a new O-ring to the No. 3 oil pipe.

   2. Connect the No. 3 oil pipe to the scavenging pump assembly and align the bolt holes.

      Note:
      

      • Do not damage the O-ring.

      • Do not rotate the No. 3 oil pipe when connecting it to the scavenging pump assembly.

   3. Install the 2 bolts.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

3. Click here

   INSTALL NO. 2 OIL PIPE

   
   

   1. Install a new O-ring and new oil pipe seal to the No. 2 oil pipe.

   2. Connect the No. 2 oil pipe to the scavenging pump assembly and align the bolt holes.

      Note:
      

      • Do not damage the O-ring.

      • Do not rotate the oil pipe when connecting it to the scavenging pump assembly.

   3. Install the 2 bolts.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

4. Click here

   INSTALL NO. 1 OIL PIPE

   
   

   1. Install a new O-ring and new oil pipe seal to the No. 1 oil pipe.

   2. Connect the No. 1 oil pipe to the scavenging pump assembly and align the bolt holes.

      Note:
      

      • Do not damage the O-ring.

      • Do not rotate the oil pipe when connecting it to the scavenging pump assembly.

   3. Install the 2 bolts.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

5. Click here

   INSTALL TIMING CHAIN COVER ASSEMBLY

   Click here