THERMOSTAT INSTALLATION

PROCEDURE

1. INSTALL WATER INLET WITH THERMOSTAT SUB-ASSEMBLY

   
   

   1. Install a new No. 2 water inlet housing gasket to the water inlet with thermostat sub-assembly.

   2. Install the water inlet with thermostat sub-assembly to the water inlet housing with the 3 nuts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

2. CONNECT NO. 2 RADIATOR HOSE

   Click here

3. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE

   Click here

4. CONNECT VENTILATION HOSE

   Click here

5. ADD ENGINE COOLANT

   Click here

6. INSPECT FOR COOLANT LEAK

   Click here

7. INSTALL COOL AIR INTAKE DUCT SEAL

   Click here

8. INSTALL CENTER NO. 4 ENGINE UNDER COVER

   Click here

9. INSTALL V-BANK COVER SUB-ASSEMBLY

   Click here