DIFFERENTIAL PRESSURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. REMOVE DIFFERENTIAL PRESSURE SENSOR ASSEMBLY (for Bank 1)


    1. B0067UC

      Disconnect the differential pressure sensor assembly connector.

    2. B0066GU

      Slide the clip and disconnect the No. 2 vacuum transmitting hose assembly from the differential pressure sensor assembly.

    3. Remove the nut and differential pressure sensor assembly from the sensor bracket.

  3. REMOVE DIFFERENTIAL PRESSURE SENSOR ASSEMBLY (for Bank 2)


    1. B006538

      Disconnect the differential pressure sensor assembly connector.

    2. B00664Q

      Slide the clip and disconnect the No. 1 vacuum transmitting hose assembly from the differential pressure sensor assembly.

    3. Remove the nut and differential pressure sensor assembly from the sensor bracket.