CANISTER(w/o Canister Pump Module) INSTALLATION

PROCEDURE

1. Click here

   INSTALL NO. 2 FUEL SENDER GAUGE ASSEMBLY

   Click here

2. Click here

   INSTALL CANISTER (FUEL TANK VENT TUBE ASSEMBLY)

   Click here

3. Click here

   INSTALL REAR FLOOR SERVICE HOLE COVER

   Click here

4. Click here

   INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

   Tip:

   Use the same procedure as for the LH side.

   Click here

5. Click here

   INSTALL REAR SIDE SEATBACK ASSEMBLY RH

   Tip:

   Use the same procedure as for the LH side.

   Click here

6. Click here

   CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH

   Tip:

   Use the same procedure as for the LH side.

   Click here

7. Click here

   INSTALL FRONT DOOR SCUFF PLATE RH

   Tip:

   Use the same procedure as for the LH side.

   Click here

8. Click here

   CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

9. Click here

   INSPECT FOR FUEL LEAK

   Click here

10. Click here

    INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

11. Click here

    INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here